The DUSTHUNTER SB30 is a measuring device, designed to detect very low to moderate dust concentrations, such as in hot or volatile gases. Measurement is based on the tried-and-tested measurement principle of backward light scattering. Installation is easy and is only carried out on one side of the channel. Two different penetration depths are possible for adapting the measuring device to various channel diameters.
Device properties:
For low to medium dust content
Easy one-sided installation
Automatic check of zero and reference point
For medium to large duct diameters
Benefits
Easy installation, commissioning, and operation
Tried-and-tested measurement, not dependent on gas velocity, humidity, or particle load
Cost-effective thanks to easy mounting on just one side; no alignment necessary
Scattered light intensity: 0 ... 7.5 SI / 0 ... 3,000 SI Two freely configurable measuring ranges via SOPAS ET Nine preset measuring ranges (0 ... 7.5/15/45/75/150/225/375/1,000/3,000 SI)
Process temperature
–40 °C ... +600 °C
Process pressure
With MCU-P control unit: –50 hPa ... 2 hPa With external purge air unit: –50 hPa ... 30 hPa
Ambient temperature range
–40 °C ... +60 °C
Degree of protection
IP66
Conformities
TUEV type-examination China's EPA compliant DNV Maritime type approval
Emission Monitoring Solutions – broad instrument portfolio and
longstanding experience
Competence Brochure (CP)
English version - 01/2025
New version available in English
An overview brochure about emission monitoring, their measuring principles and technologies, global requirements and services, a selection guide and the measuring devices at a glance
